As a motorcycle rider, you have undoubtedly been in the situation where you come up to your motorcycle and are unable to get it going. This can be quite disappointing and exasperating, so make sure you read this post by TenEyck Distributing in Saint George to be informed and ready if you encounter this experience.

It can be really disappointing to approach your motorcycle ready to get on the streets and realize it won’t start. It can be quite challenging to figure out what is causing your bike to stay still, but luckily, TenEyck Distributing in Saint George, UT, has this article for you. Keep reading and learn about possible reasons for why your motorcycle won’t start and some tips on how to get it moving.

Your Battery Has No Charge

When it comes to motorcycle problems, identifying issues with your battery is definitely one of the easiest to diagnose. Batteries need to be charged for them to be able to energize your motorcycle correctly. When left unused and sitting, batteries lose their capacity to create enough power. If you find that you can turn your key and turn on your blinkers but are unable to start your motorcycle, you most probably have an almost empty battery.

Dirty Carburetor

When was the last time you cleaned your carburetor? Are you using fuel filters? Carburetors over time can have a build-up of dirt and deposits which can lead to fuel passages getting blocked. To identify if your carburetor is the one causing you problems, take your air intake off, get some starter fluid, push the starter and quirt some of the liquid into it. If you notice it revs up for a few seconds, then you definitely have a dirty carburetor that is causing you problems. Give it a proper clean and put it in place to try and get your motorcycle to start up again.

The best way to prevent your motorcycle from having engine problems is to ensure you are giving it the best products. Contact an expert at TenEyck Distributing in Saint George, UT, and learn about the benefits of a synthetic oil change and about amazing AMSOIL products for your engine. For more information call (208) 589-4660.

Not Enough Air Flow

Does your motorcycle start but stalls instantly? You might have a problem with your airflow. You can inspect this issue by giving your air filters an examination. You can test them by temporarily removing them and starting up your motorcycle. If you had success getting your bike started, then that’s a sign that the problem is, indeed, related to the airflow. You can resolve this issue by simply having your air filters replaced.

After Long-Time Storage

There are a few problems you could encounter that are related to fuel. Especially for motorcycles that have been stored for extended periods of time, it can happen that they have trouble starting up due to the gas breaking down because of it not being properly stabilized. If this happens to be the problem, giving your motorcycle fresh gas will allow it to start up. Make sure also to inspect your fuel lines, as with time, they can crack and dry out.

To ensure your motorcycle rides at its best after being stored, give your engine AMSOIL’s 15W-60 Synthetic V-Twin Motorcycle Oil to ensure its maximum protection and increase its performance. Contact TenEyck Distributing in Saint George, UT, and learn about the benefits of a synthetic oil change. Visit the online store or call (208) 589-4660 for more information.

Spark Plug Wires in Bad Condition

Your spark plug wires can wear down due to constant exposure to heat due to them being made out of plastic or metal. Go ahead and do a visual inspection of your wires, are there any splits or cracks? Try and move them around to properly inspect them and see the state the material is in. This is an issue that is crucial to fix, as it can get dangerous if you happen to come in contact with them while driving due to the temperature they are exposed to.

Problems with Compression

It is recommended to check and see if the problems are related to your compression as the process of testing can have a significant impact and can take a heavy toll on your motorcycle. The most common problem related to compression has to do with the cylinders, if one of them loses compression, your engine will have a tough time getting started. To resolve this issue, you will need to raise the temperature of the mixture to get it burning by compressing the air and fuel mixture. This process can be quite complicated, so ensure you get an expert's opinion to ensure the wellbeing of your motorcycle.

Make Sure Your Motorcycle Is in Top Condition by Giving It a Synthetic Oil Change in Saint George

There are preventive measures you can take to ensure you don’t have a motorcycle that won’t start. The best thing you can do is to give your bike frequent maintenance and the products it needs. AMSOIL’s 15W-60 Synthetic V-Twin Motorcycle Oil, you will have a protected engine and will enjoy all the benefits of a synthetic oil change. Speak with an expert at TenEyck Distributing in Saint George, UT, and get familiar with all the products AMSOIL offers for your engine. Visit the online store or call (208) 589-4660 for more information.